{% set baseFontFamily = "Open Sans" %} /* Add the font family you wish to use. You may need to import it above. */

{% set headerFontFamily = "Open Sans" %} /* This affects only headers on the site. Add the font family you wish to use. You may need to import it above. */

{% set textColor = "#565656" %} /* This sets the universal color of dark text on the site */

{% set pageCenter = "1100px" %} /* This sets the width of the website */

{% set headerType = "fixed" %} /* To make this a fixed header, change the value to "fixed" - otherwise, set it to "static" */

{% set lightGreyColor = "#f7f7f7" %} /* This affects all grey background sections */

{% set baseFontWeight = "normal" %} /* More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set headerFontWeight = "normal" %} /* For Headers; More than likely, you will use one of these values (higher = bolder): 300, 400, 700, 900 */

{% set buttonRadius = '40px' %} /* "0" for square edges, "10px" for rounded edges, "40px" for pill shape; This will change all buttons */

After you have updated your stylesheet, make sure you turn this module off

ARRB__Workshop_Header

DoT Level 1, 2 and 3 Bridge Inspection and Monitor Process February

Bridge Inspection and Monitor,

Overview of training 
The Australian Road Research Board (ARRB), Trafficworks and Road Solutions have been engaged by The Department of Transport – Victoria (DoT) to be licenced training providers delivering VicRoads and DoT accredited technical training.

Training Courses

All Training Courses will be held at the ARRB national headquarters unless otherwise noted:

Workshop Information
Workshop Dates: February 8-9
Time: Day 1: 9am – 5pm, Day 2: 9am - 1pm
Duration: 1.5 days
Location: National Transport Research Centre, Port Melbourne
Cost: $1,600 + GST

Course Information

This course aims to provide an introduction to, and awareness of, bridge inspections levels (Level 1, 2 and 3) and the monitoring process. The course will provide each participant with a general understanding of bridge inspections and its importance as part of the asset management process.

Learning Outcomes

At the end of this course, participants will be able to:

  1. Identify the difference in scope between Level 1, Level 2 and Level 3 bridge inspections and monitoring inspections.
  2. Understand the scope and limitations for each inspection level.
  3. Understand the importance of accurate data capture with a methodical system that supports infrastructure assets management and decision making.

 

Download Brochure

Register now

*Dates and prices are subject to change. 

 

Topics: Workshop